MPPT Solar Charge Controller

PC1600A Series 45/60A (MPPT)

Features:

  • 45A/60A MPPT Solar charge controller(Air cooling)
  • 12V/24V/36V/48V auto work
  • MPPT efficiency>99%,Peak conversion efficiency >98%
  • DSP processors architecture ensure high speed and performance
  • Multi-stage charging mode
  • Protection: PV array short circuit ,PV reverse polarity , Battery reverse polarity , Over charging , Output short circuit
  • DC load support

Where to Buy?


Overview


chagc-1

MPPT Solar Charge Controller

45/60A MPPT Solar charge controller.


ecc-1

High Efficiency

MPPT efficiency>99%, Peak conversion efficiency >98%.


dsp-1

DSP Chip

DSP processors architecture ensures high speed and performance.


pc1600aabb-1

LCD/LED Display Information

1. MENU: Enter or exit setting mode
2. UP: Increase the setting data
3. DOWN: Decrease the setting data
4. ENTER: Confirm the selection in setting mode

LED indicator System status
5. PV Green On PV voltage normal
Flashing every 1s PV fault is recovering
Flashing every 2s PV fault can’t recover
Off PV is off
6. BATT Yellow On Battery voltage normal
Flashing every 1s Battery fault is recovering
Flashing every 2s Battery fault can’t recover
Off Battery is off
7. FAULT Red Flashing Fault
Off Normal

8. LCD display


Figure 1 Back Panel Information

9. BTS: Remote external temperature terminal
10. REM: Communication network terminal
11. LO-: The load negative terminal
12. LO+: The load positive terminal
13. BA-: The battery negative terminal
14. BA+: The battery positive terminal
15. PV-: PV array negative terminal
16. PV+: PV array positive terminal


pc1600aabb-2


Solar System Connection

MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging.

pc1600aabb

Specification

Model PC16-4515A PC16-6015A
Default Battery System Voltage 12VDC/24VDC/36VDC/48VDC (Auto Detection)
CONTROLLER INPUT
PV Open Circuit Voltage 100VDC@12V/ 145VDC @24V/ 145VDC @36V/ 145VDC @48V
PV Array MPPT Voltage Range 16VDC~100VDC / 32VDC~130VDC / 48VDC~130VDC / 64VDC~130VDC
Max PV Input Power (12V) 600W 800W
Max PV Input Power (24V) 1200W 1600W
Max PV Input Power (36V) 1800W 2400W
Max PV Input Power (48V) 2400W 3200W
BATTERY
Peak Conversion efficiency 98% (MPPT Efficiency 99%)
Max Charging Current 45 amps continuous 60 amps continuous
Absorption Voltage 12.5VDC/25.0VDC/37.5VDC/50.0VDC
Refloat Voltage 13.7VDC/27.4 VDC/41.4VDC/54.8VDC
Float Voltage 14.3VDC/28.6 VDC/42.9VDC/57.4VDC
Low Voltage Protection Point 10VDC/20.0 VDC/30.0VDC/40.0VDC
DC OUTPUT
Output Voltage 10.0VDC~14.5VDC / 20VDC~29.0VDC / 30.0VDC~43.5VDC / 40.0VDC~58.0VDC
Max Load Current 45 amps continuous 60 amps continuous
Warning for low voltage 10.25VDC/20.5 VDC/30.75VDC/41.0VDC
Cut off for low voltage 10.0VDC/20.0 VDC/30.0VDC/40.0VDC
Low voltage recovery 11.0VDC/22.0 VDC/33.0VDC/44.0VDC
GENERAL SPECIFICATION
Radiating mode Air cooling
DISPLAY & PROTECTION
LED indication Systematic operation, LV indication, LV protection, over charge protection, loads protection, short circuit protection
LCD display Charge voltage, charge current, voltage of storage battery, capacity of storage battery, output current
Alarm Protections PV array short circuit, PV reverse polarity;Battery reverse polarity, Over charging protection;Output short circuit protection;Low voltage protection for storage battery.
MECHANICAL SPECIFICATIONS
Mounting Wall mount
W*H* D(mm)/Net Weight(kg) 205*371.7*124.3mm/6.45kg
OTHER
Environmental Rating Indoor
Operation Temperature Range -25~+55°C
Ambient humidity 0~90% relative humidity(non-condensing)
Altitude ≤ 3000m
Loading(20GP/40GP/40HQ) 900pcs/1850pcs/2100pcs
*required

*required

*required

*required

Related Products

MUST Power The World! Contact Now