Single Phase On Grid Solar Inverter

PH2000 TL Series (1.5-3KW)

Features:

  • Zero export to grid
  • Reactive Power Control (RPC)
  • U-disk for software updating
  • Light weight in small size
  • Without LCD,no risk of dust or water
  • Seperate APP setting/monitoring
  • Wi-Fi/GPRS
  • MUST Pad local monitoring

Where to Buy?



ph2000a-1

LCD/LED Display Information

1. The inverter power flow direction indicator
2. The inverter operation status indicator


Figure Back Panel Information

3. PV input terminals
4. Battery input terminals and cover
5. PV input switch
6. WIFI com module and USB port
7. BAT._NTC and RS485 communication (BMS com, load monitor com )
8. AC Output terminals and cover


ph2000a-2


Solar System Connection

The unit is bidirectional which apply to PV system with battery to store energy. Energy produced by the PV system is used to optimize self-consumption; excess energy is used to charge the batteries, and then fed into the public grid when the PV energy is adequate, When PV energy output is in sufficient to support connected loads, the system automatically get energy from the batteries if battery capacity is abundant. If the battery capacity is insufficient to meet own consumption requirements, electricity will be drawn from the public grid.

ph2000aa

Specifications PH20-1500TL PH20-2000TL PH20-3000TL
Input Data (DC) 
Max. DC power 1800W 2300W 3400W
Max. DC voltage 450V 600
Start voltage 80V
DC nominal voltage 360V
PV voltage range  70-450V 70-600V
MPP voltage range 80-450V 80-580V
Max. input current per string of tracker A 11A
Number of independent MPP inputs 1
Output Data (AC) 
Nominal AC output power 1500W 2000W 3000W
Max. AC apparent power 1500VA 2000VA 3000VA
Max. output current 7.5A 9.5A 14.3A
AC nominal voltage; range 220V/230V/240V; 180Vac-280Vac
AC grid frequency; range 50,60H;±5 Hz
Power factor at rate power 1
Power factor 0.9leading…0.9lagging
THDi <3%
AC connection Single phase
Efficiency 
Max. efficiency  97%
Euro – eta 96.50%
MPPT efficiency 99.50%
Protection Devices  
DC reverse polarity protection Yes
DC switch ratiing for each MPPT  Yes
Output over current protection Yes
Output overvoltage protection-varistor Yes
Ground fault monitoring Yes
Grid monitoring Yes
Integrated all – pole sensitive leakage current monitoring unit Yes
General Data 
Dimensions (W / H / D) 259*328*138mm
Weight 5.2kg 7.3kg
Operating temperature range -25…+600C      (-13…+ 1400F)    with derating above 450C(1130F)
Noise emission (typical) ≤ 25 dB(A)
Altitude Up to 2000m (6560ft) without power derating
Relative humidity 95%
Consumption: operating (standby) / night <5W / < 0.5 W
Topology Transformerless
Cooling concept Natural
Environmental protection rating IP65
Features 
DC connection H4/MC4
AC connection Screw terminal
Display LED
Interfaces:  Wi-Fi/USB/GPRS/RS485 Yes/Yes/Opt/Opt
Warranty: 5 years / 10 years / 15 years Yes/Opt/Opt
Certificates and approvals CE,IEC 62109, VDE 0126-1-1, VDE-AR-N4105,RD1663,G59,G83, AS4777, AS/NZS 3100, CGC
*required

*required

*required

*required

Related Products

MUST Power The World! Contact Now