Lithium Iron Phosphate can be used in most applications that use Lead Acid, GEL or AGM type batteries.
Suitable applications include:
•Switching applications and more
High cycle life
6000 Cycles (25℃, 70% SOC) for effectively lower total of ownership cost
Longer service life
Low maintenance batteries with stable chemistry.
Built in circuit protection
Battery Management System (BMS) is incorporated against abuse.
up to 6 months thanks to its extremely low self discharge (LSD) rate and no risk of sulphation.
Save time and increase productivity with less down time thanks to superior charge/discharge efficiency.
Extreme heat tolerance
Suitable for use in a wider range of applications where ambient temperature is unusually high: up to +60°C.
Lithium batteries provide more Wh/Kg while also being up to 1/3 the weight of its SLA equivalent.
•Do NOT short circuit, reverse polarity, crush or disassemble.
•Do NOT heat or incinerate.
•Do NOT immerse in any liquid.
•Store at 30~50% SOC. Recharging every 3 months is recommended. The storage area should be clean, cool, dry and ventilated.
|Life Cycles||6000 Cycles (25℃, 70% SOC)|
|Recommended Charge Voltage||29.2V|
|Recommended Charge Current||20.0A|
|End of discharge voltage||20.0V|
|Maximum continuous current||Charge||100.0A/ 200.0A|
|BMS Cut-Off Voltage||Charge||<31.2 V (3.9V/Cell)|
|Discharge||>16.0 V (2s) (2.0V/Cell)|
|Temperature||Charge||-4 ~ 113 ℉ (0 ~ 45℃ )|
|Discharge||-4 ~ 131 ℉ (-20 ~ 55 ℃ )|
|Storage Temperature||23~95 ℉ (-5~35℃ )|
|Dimension (L x W x H)||522 x 240 x 218 mm|
20.6 x 9.5 x 8.6
|Approx. Weight||99.2 lbs (45 kg)|
|Charge retention and capacity recovery capability||Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90|