Please carefully confirm MUST company name and account before making payment to avoid any loss ! DETAILS x

Low Frequency Pure Sine Wave Inverter

PH3000 Pro Series (1-6KW)

Features:

  • Rated power 1kw to 6kw
  • Pure sine wave output
  • 3 times surge power
  • Wide frequency 40Hz-80Hz
  • Overload and short circuit protection
  • Built-in pure copper UI transformer
  • Smart battery charger designed for optimized battery performance
  • Cold start function
  • Support RS232 monitoring function with free CD
  • Support BTS and AGS function
  • DIP Switch offer customized performance
  • Remote Control Panel (optional)
  • Compatible to generator

Three Colors Option:

Red

Silver

Green

Inverter Battery Cable(Optional):

DC Wiring recommendation

It is suggested the battery bank be kept as close as possinle to the inverter. The following cable is a suggested wiring option for 1 meter DC cable.

Please find the following minimum wire size. In case of DC cable longer than 1m, please increase the cross section of cable to reduce the loss.

ModelBattery VoltageWire gage/MinModelBattery VoltageWire gage/Min
0-1.0m0-1.0m
1KW12VDC1*6AWG2KW12VDC1*2AWG
24VDC1*6AWG24VDC1*4AWG
1.5KW12VDC1*4AWG48VDC1*6AWG
24VDC1*6AWG4KW24VDC4*2AWG
3KW12VDC1*2AWG48VDC1*4AWG
24VDC1*3AWG6KW24VDC1*2AWG
48VDC1*6AWG48VDC1*3AWG
5KW24VDC1*2AWG   
48VDC1*3AWG   

Where to Buy?


Overview


chagc-1

Smart Battery Chargers

Smart battery charger design for optimized battery performance.


battery-1

Battery Protection

Low voltage, overload, and high voltage, over temperature protection.


sine-1

Pure Sine Wave

Pure sine wave output.


EEP30PRO-01

LCD/LED Display Information

1. SwitchPower saver auto: Power on with saver mode(power saver ≤ 25W)
Unit Off: Power totally off(If there is AC power,inverter have charger function)
Power saver off: Power on without saver mode

2. AC Charge Indicator
3. AC power Indicator
4. Inverter Indicator
5. Charge current adjustable:25%,50%,75%,100%.(Optional)
6. Check inverter


Figure 1 Back Panel Information

1. Battery input
2. RS232 communication port
6. AGS
7. BTS
8. DIP Switch (SW1-SW5)
DIP Switches
On the rear panel of inverter, there are 5 DIP switches which enable users to customize the performance of the device.
Table 2.5.11 dip switch function setting(For more details information,please check in the user manual.)

DIP switch NO.Switch functionPosition:1Position :0
SW1Low battery trip volt10.5VDC11.0VDC
*2 for 24VDC, *4 for 48VDC
SW2AC input range/(AVR)120VAC75-140VAC95-140VAC
230VAC145-272VAC185-272VAC
SW3Power saver auto settingDetect load per 5secsDetect load per 30secs
SW4O/P frquency setting50Hz60Hz
SW5Solar/AC priority settingUtility prioritySolar priority

9. Remote control


EEP30PRO-02EEP30PRO-10
RS232 Computer Monitoring Page



EEP30PRO-06

Optional BTS Function-Battery Temperature Sensor

Variances in charging voltage & S.D. Voltage base on the battery temperature


Remote Control Panel (Optional)




PH3000 PRO 4KW-6KW model update with “UI type”transformer

Efficiency is more higher and with lower self-consumption




EEP30PRO-03

Figure 2 Back Panel Information

3. Charger Input Protect
4. Inverter Output Protect
5. Output 10A MAX
10. AC Input/AC Output


Other Features

PH3000 Pro series is very economical pure sine wave inverter , and AC charger from 35A to 70A .Solar /AC priority configurable . When solar priority , in case its charge current lower than inverter’s charger from AC , AC will supplement to charge the batteries ,to optimize charging. With low frequency transformer ,it enable the inverter to operate with all kinds of home appliances.

Inverter Connection

ep3000pro001

Package

EEP30PRO-05

Specification

MODELPH30-1KW PROPH30-1.5KW PROPH30-2KW PROPH30-3KW PROPH30-4KW PROPH30-5KW PROPH30-6KW PRO
Default Battery System Voltage12VDC24VDC12VDC24VDC12VDC24VDC12VDC24VDC48VDC24VDC48VDC24VDC48VDC24VDC48VDC
INVERTER OUTPUT
Reted Power1.0KW1.5KW2KW3KW4KW5KW6KW
Surge Rating (20ms)3.0KVA4.5KVA6.0KVA9.0KVA12KVA15KVA18KVA
Capable Of Starting Electric Motor1HP1HP1HP2HP3HP
WaveformPure sine wave/ same as input (bypass mode)
Nominal Output Voltage RMS100V/110V/120VAC  220V/230V/240VAC(±10% RMS)220V/230V/240VAC(±10% RMS)
Output Frequency5OHz/60Hz±0.3 Hz
Inverter Efficiency(Peak)>88%
Line Mode Efficiency>95%
Power Factor1.0
Typical Transfer Time10ms(max) 10ms(max)
AC INPUT
Voltage230VAC
Selectable Voltage Range96~132VAC  155~280VAC(For Personal Computers)  
Frequency Range50Hz/60Hz (Auto sensing) 40~80Hz
BATTERY
Minimum Start Voltage10.0VDC /10.5VDC for12VDC mode (*2 for 24VDC, )
Low Battery Alarm10.5VDC±0.3V for12VDC mode (*2 for 24VDC, )
Low Battery Cutoff10.0VDC±0.3V for12VDC mode (*2 for 24VDC, )
High Voltage Alarm16.0VDC±0.3V for12VDC mode (*2 for 24VDC, )
High Battery Voltage Recover15.5VDC±0.3V for12VDC mode (*2 for 24VDC, )
Idle Consumption-Search Mode<25W when power saver on
CHARGER
Output VoltageDepends on battery tvpe
Charger AC Input Breaker Rrating10A30A30A30A40A
Overcharge Protection S.D.15.7VDC for 12VDC mode (*2 for 24VDC mode)
Maximum Charge Current35A20A45A25A65A35A75A45A30A65A35A70A40A75A50A
BYPASS & PROTECTION
Input Voltage WaveformSine wave (grid or generator)
Nominal Input Frequency50Hz or 60Hz
Overload Protection (SMPS Load)Circuit breaker
Output Short Circuit ProtectionCircuit breaker
Bypass Breaker Rating10A30A30A30A 40A
Max Bypass Current30Amp
SOLAR CHARGER
Maximum PV Charge Current50A
DC Voltage12V/24V/48 
PWM Range @ Operating Voltage15~80VDC
Maximum PV Array Open Circuit Voltage90VDC
Maximum Efficiency>97%
Standby Power Consumption<2W
MECHANICAL SPECIFICATIONS
MountingWall mount
Dimensions (W*H*D)426*206*178 mm601*206*178
Net Weight (Solar CHG) kg16.51721.1202624.524.838.235.845.24545.245
Shipping Dimensions(W*H*D)570*335*300mm 750*335*300mm
Shipping Weight (Solar CHG) kg19.32024.122.829.127.527.542.34049.549.349.549.3
OTHER
Operation   Temperature  Range0°C to 40°C
Storage   Temperature-15°C to 60°C
Audible   Noise60dB MAX
DisplayLED+LCD
Standard Warranty1 year

Approximate Back-up Time Table

Power Rate(w)backup time(H) @1*100Ahbackup time(H) @2*100Ahbackup time(H) @4*100Ahbackup time(H) @4*200Ahbackup time(H) @8*200Ah
10000.48061.6023.503047.6896 
20000.21360.48061.6023.503047.6896
30000.10680.28480.85442.1364.8416
4000 0.21360.48061.6023.50304
5000 0.128160.341761.196162.73408
6000 0.10680.28480.85442.136
*required

*required

*required

*required

Related Products

MUST Power The World! Contact Now