Please carefully confirm MUST company name and account before making payment to avoid any loss ! DETAILS x

Low Frequency On/Off Grid Hybrid Solar Inverter

PH3000 Single-phase Series (2-4KW)

PH3000 series Energy Storage Inverter has capacity of 2KW, 3KW and 4KW, it is multi-functional, combining functions of inverter, On-Grid, MPPT solar charger and battery charger to offer uninterruptible power support with portable size. Its comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.

Features:

  • Rated power 2KW to 4KW
  • Smart LCD setting(Working modes, Charge Current, Charge Voltage, etc.)
  • Built-in MPPT 60A solar charge controller
  • MPPT Efficiency max 98%
  • Combining solar system, AC utility, and battery power source to supply continuous power
  • Multiple operations: basic Grid-tie, Off-Grid, Grid-Interactive Parallel operation with up to 3 units
  • Support CAN, RS485 monitoring function with free CD
  • WIFI remote monitoring (optional)

Three Colors Option:

Red

Silver

Green

Where to Buy?


SUITABLE FOR CHARGING LITHIUM BATTERY


SAVE ELECTRICITY BILL

It is hybrid energy storage inverter, can feed power into grid, to use free solar power help you save electricity bill.


PARALLEL FUNCTION UP TO 3 UNITS


BUILT-IN MPPT SOLAR CHARGE CONTROLLER

By maximizing solar energy harvesting under a wider variety of environmental conditions, MPPT technology helps the system extract as much electricity as possible for more effective energy storage. It is ideal for use in a wide-range of residential, light commercial, agricultural, community and other applications that can benefit from better yields through more advanced charge controller technology.


WE MAKE YOU AN EXCELLENT SHELL

This inverter is also built to withstand reasonable heat and temperature fluctuations because of its over-temperature protection and dual thermally-controlled fans. And it’s protected from humidity or airborne dust and dirt by virtue of its marine-coated (or “conformal-coated”) boards. This inverter provides the reliability needed in any business or residential emergency backup power applications.


ACTIVE COOLING SYSTEM

2 large cooling fans are adapted to ensure the inverter is additionally ventilated. As soon as the device produces more heat than can be dissipated through the enclosure, internal fans are switched on creating an air flow through the cooling ducts of the enclosure. The fans are RPM controlled, i.e. it increases its speed with increasing temperature.


WIFI COMMUNICATION

you can download this app on your cellphone and monitor the whole system, you will know how much electricity the system generate and sell to utility.


PRODUCT DETAILS


INVERTER SYSTEM CONNECTION

In comparision with pure on-grid solar inverter, PH3000 model can not only feed-in power to grid, but also store PV power to battery, and power loads directly. Combining the function of inverter, on-grid, MPPT solar charger, and battery charger to offer uninterruptible power support. Its comprehensive LCD display offers user configurable and easy accessible button operation, such as battery charging current, AC/solar charging priority, and acceptable input voltage based on different appications.


APPLICABLE PLACE


ACTUAL CASE

Specification

MODELPH30-2048PH30-3048PH30-4048
Nominal Battery System Voltage48VDC
INVERTER OUTPUT
Rated output power2000W3000W4000W
Rated output voltage and frequency230Vac / 50Hz
Rated output current8.7A13A17.4A
Output voltage precision230Vac±1%
Output frequency precision50Hz±0.1%
THD (Linear loads)Off grid≤2%;Grid discharge ≤3%;Grid charge ≤3%
Dynamic response speed(0←→100%)20ms
Power factorGrid discharge 99.9% & Grid charge 99.9%
Overload capability100%<load≤110%,30 minutes; 110%<load≤125%,1 minutes; 125%<load≤150%,30 seconds;load>150%,10 seconds; Short circuit,5 seconds
Grid / Off grid change time<10ms
Output wavesine wave
Inverting efficiency 80% resistive loads≥92%≥93%
AC INPUT
AC input maximum current17.4A26A34.8A
Acceptable input voltage rangeDefaults 186Vac ~253Vac; Narrow 174Vac ~272Vac; Wide    95Vac ~272Vac
Nominal frequency50Hz / 60Hz
BATTERY
Rated input voltage48VDC
Allowed input DC voltage range40VDC ~ 62VDC
Low voltage alarm42VDC
High voltage alarm60VDC
SOLAR CHARGER & AC CHARGER
PV Open Circuit Voltage145VDC
Max Solar Charging Current60A60A
Max AC Charging Current40A60A80A
DISPLAY & PROTECTION FUNCTION
LED indicationSystematic operation, indication of charge and discharge, indication of fault
LCD displayoutput voltage, output current, grid voltage, grid current, voltage of storage battery, load power, chart of capacity
Protection FunctionInput LV protection;Input OV protection;Output overload protection;Output Short Circuit Protection
MECHANICAL SPECIFICATIONS
MountingWall mounted
Machine Dimensions (W*H*D)(mm)337*462*183mm337*462*183mm370*462*183mm
Package Dimensions (W*H*D)(mm)476*602*325mm476*602*325mm476*602*325mm
Net Weight (kg)2529.535
Gross Weight (kg)30.33338.5
OTHER
Communication terminalRS485 / CAN bus
Operation Temperature Range0℃  ~ +50℃
Environmental Protection RatingIndoor(IP20)
Ambient humidity0 ~ 90% relative humidity(non-condensing)
Altitude≤2000m

*Products specifications are subject to change without further notice

  • Brochure: PH3000SINGLE.pdf Download
  • Software: RS485-Software-for-EP18-PV18-PH18-PH30-PV35-Wincc-2.0.30&Ch340tDrver.7z Download
  • Software: Usb-to-Rs485-Driver.zip Download
*required

*required

*required

*required

Related Products

MUST Power The World! Contact Now