LP1800 PRO Series (51.2V-100/200Ah)

Lithium Iron Phosphate (LiFePO4) Battery 5.12~10.24KWH

MUST LP1800 PRO Series is a lithium iron phosphate (LiFePO4) battery that offers multiple energy storage options through an expandable modular design (3-5 modules combined), which further simplifies installation and O&M with multiple smart functions.



+ 3-in-1: wall-mounted, rack-mounted, stacked-mounted

+ Large capacity, high power output

+ Safest lithium iron phosphate battery cell with high energy density

+ Modular design: supports up to 15 units in paralleland

+ IP21 protection for both indoor and outdoor use

+ Support CAN & RS485 communication with mainstream inverters

+ Local monitoring via LCD monitor

+ WiFi Remote monitoring

Technical Data LP18 PRO-48100 LP18 PRO-48200
Nominal Voltage 51.2V
Nominal Capacity 100Ah 200Ah
Nominal energy 5120Wh 10240Wh
Life Cycles 6000 cycles @ 80% DOD, 25℃
Recommended Charge Voltage 58.4V
Recommended Charge Current 20A 40A
End Of Discharge Voltage 44V
Standard Method Charge 20A 40A
Discharge 50A 100A
Maximum Continuous Current Charge 100A 100A
Discharge 100A 100A
BMS Cut-Off Voltage Charge 58.4 V (3.65V/Cell)
Discharge 32.0V (2s) (2.0V/Cell)
Temperature Charge -4 ~ 113 ℉ (0 ~ 45℃ )
Discharge -4 ~ 131 ℉ (-20 ~ 55 ℃ )
Storage Temperature 23~95 ℉ (-5~35℃ )
Shipment voltage ≥51.2V
Module Parallel Up to 15 units
Communication CAN2.0/RS232/RS485
Case Material SPPC
Machine Dimension (W*H*D) 446x627x177mm 446x627x177mm
N.W 47kg 82kg
G.W 49kg 84kg
Charge Retention And Capacity Recovery Capability Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃ for 7d, Charge retention rate≥90%, Recovery rate of charge≥90
Certification & Standards CE-EMC (EN 61000-6-3: 2007+A1: 2011+AC: 2012 EN IEC 61000-6-1: 2019) IEC62619-1:2018; IEC62619:2022; IEC62619:2017; UN38.3/ MSDS