• With double conversion online design, zero output transfer time. Single phase input and output voltage.
• Adopt DSP digital control, excellent performance indicators, more steady and reliable.
• Adopt active power factor correction technology (PFC), the input power factor is 1, can reduced the pollution to the grid, To energy saving and reducing system investment.
• Ultra-wide input voltage range.
• Input frequency range 40~70Hz, support various fuel generators.
• With LCD+LED real-time display, users can intuitively understand the UPS operating status.
• With self- detection function, can detect hidden faults of UPS in time.
• With AC input over voltage, low voltage protection, output overload protection, short circuit protection, temperature protection, battery low voltage warning protection and battery overcharge protection.
• The efficiency of the whole UPS is as high as 95.5%, which reduces the power loss of it and saves the user’s use cost.
• When there is no mains power, you can directly use the battery to cold start.
• With input neutral and live line detection function, avoid the reverse connection of UPS utility input
• When utility cut-off, the UPS discharge battery in the battery mode; when the city power is recovery ,UPS turn on automatically,and charge battery at the same time, as unattended function.
• Standard RS232 communication outlet ,connect UPS and computer to realize multifunctional and multi-purpose monitoring and management operations, available SNMP card (optional) to UPS remote monitoring function.
|Input connection type||L+N+PE|
|Rated input voltage||208/220/230/240VAC|
|Frequency rage||50/60+HZ (default), ±10HZ (can be set)|
|Input power factor||≥ 0.99|
|Input THD||≤ 4% % linear load|
|Output connection type||L+N+PE|
|Output frequency||Mains mode:same as AC frequency, battery mode : 50/60HZ+-0.1%|
|Output THD||≤2% linear load, ≤ 4% Non-linear load (PF=0.7)|
|Output power factor||1|
|Overload Capacity||AC mode :
Battery mode :
|AC mode switch to battery mode||0ms|
|mains inverter mode switch to bypass mode||4ms|
|AC priority mode||Support|
|AC Mode (Full Load)||Peak efficiency 95.5%, Full load efficiency 95%|
|Battery Mode (Full Load)||Peak efficiency 95.3%, Full load efficiency 94.8% (20pcs Battery)|
|Battery type||Lead Acid Battery|
|Number of batteries||/|
|Battery Charge Current||1-12A (can be set) 1A (default)|
|Charging Mode||Two-stage/three-stage charging|
|LCD||2×8 PIN/Pitch 2.54mm, support 128-bit segment code, up to 4 buttons + 4 LEDs, can display operating mode / load / input / output, etc|
|RS-232||Support: Windwos 2000/2003/XP/Vista/2008/7/Linux/Unix and MAC|
|USB||Windows Famlly & MAC|
|Intelligent slot (Optional)||SNMP/AS400 Relay Card/RS485|
|Operating ambient temperature||0~40℃|
|Operating environment humidity||20%~95% (No condensation)|
|Storage temperature||-15~60℃ ( Battery : 0~40℃ )|
|Altitude||The altitude should not exceed 1000m, derating above1000m, up to 4000m (max ) , refer IEC62040|
|Dimensions (D*W*H) (mm)||438*420*88|
|Net weight (kg)||10
(without battery pack)
(without battery pack)